SAP Basis Tech Supports

Symptom
This note contains information aboutBusiness Intelligence Content 7.04in relation to
Add-On installation
Basis (BW) upgrade to SAP_BW 7.00 or 7.01
Add-On Support Packages
Other terms

SAINT, installation, upgrade, BI_CONT, add-on, AOI, AOX
Reason and Prerequisites
You want to install Business Intelligence Content (BI_CONT 7.04).
You want to perform a delta upgrade from BI_CONT 7.02 or 7.03 to BI_CONT 7.04.
You want to perform a BW upgrade to SAP_BW 7.00 or 7.01.
You want to import Add-On Support Packages for BI_CONT 7.04.

Solution

This note is updated on a regular basis. You should therefore obtain the latest version before you start the upgrade.

Contents
1. Change history2. Important general informationa) qRFC versionb) Updates3. Installation, delta upgradea) Prerequisiteb) Preparationsc) Performing the installationd) Performing the delta upgrade
I) Including BI_CONT 704 in an Enhancement Package upgrade with SAPehpi
II) Delta upgrade after BI_CONT 704 with SAINT
4. BW upgradea) Prerequisiteb) Preparationsc) Additional information about PREPAREd) Additional information about the upgradee) Password5. Postprocessing the BI_CONT 704 installation/upgrade

Contents
1. Change history
DateSectionShort description19.05.20094.e)A description and solution of an error that occurs when you upgrade to ECC 6.0 (with or without an Enhancement Package) has been added.
2. Important general informationa) qRFC versionNote that the qRFC version must be 45 or higher (see Note 0498484).b) UpdatesProcess your V3 update entries before you carry out the upgrade. Otherwise, there is a risk that you may no longer be able to update entries if changes are introduced into the interface structures of the V3 update modules by the patch or upgrade (see Note 328181).Before the upgrade, process your entries in the extraction queues. Otherwise, there is a risk that you may no longer be able to update these entries if changes to the interface structures of the qRFC function modules are introduced by the patch or the upgrade (see Note 328181).Before the upgrade, delete your entries in the reconstruction tables for the logistics extraction applications. Otherwise, there is a risk that you may no longer be able to use these entries if changes to the extraction structures are introduced by the patch or the upgrade (see Note 328181).3. Installation, delta upgradea) PrerequisiteImport the latest SPAM/SAINT update.
Refer to the following notes before you start the installation:Add-Ons: General conditions70228Note about the release strategy153967Known problems in transaction SAINT179116
Required component Support Packages for BI_CONT 704:SAP NetWeaver 7.0
SAP NetWeaver 7.0 Support Package stack 17
SAP_BASIS700Support Package 17SAP_ABA700Support Package 17SAP_BW700Support Package 19PI_BASIS2005_1_700Support Package 17or2006_1_700Support Package 07
SAP EHP1 for SAP NetWeaver 7.0
SAP EHP1 for SAP NetWeaver 7.0 Support Package stack 02:
SAP_BASIS701Support Package 02SAP_ABA701Support Package 02SAP_BW701Support Package 02PI_BASIS701Support Package 02
Component Support Packages that are also required for the delta upgrade to BI_CONT 704:
BI_CONT703Support Package 09If you have not yet installed the required component Support Packages, you can include them in the installation or delta upgrade.For the delta upgrade of BI_CONT 702 to BI_CONT 704, the BI_CONT 703 delta upgrade package SAPKIBIIIC must be made available and must be included in the delta upgrade.
BI_CONT 704 has been released with BI_CONT 704 SP01. You must include BI_CONT 704 Support Package 01 in the installation or the upgrade.
BI_CONT 704 must not be installed if BANK-ALYZE 50 has already been installed in the system. In this case, use BI_CONT 703.
———————————————————–
a) PreparationsDownload the installation or upgrade package from SAP Service Marketplace (quick link /INSTALLATIONS) into a temporary directory, or install the DVD with material number:51033499.
Installation: <SAR archive> = K-704IHINBICONT.SAR
Delta upgrade: <SAR archive> = K-704DHINBICONT.SARLog on as one of the following users:
<sid>adm on UNIX,
<SID>OFR on AS/400,
<SID>adm on Windows NTSwitch to the transport directory of your SAP System. You can display the transport directory by calling transaction AL11 and selecting the DIR_TRANS parameter.Unpack the SAR archive <SAR archive> from the subdirectory <TYPE> using the following statement:
SAPCAR -xvf /<CD_DIR>/INST/DATA/<TYPE>/<SAR archive> on UNIX,
SAPCAR ‘-xvf /QOPT/<VOLID>/INST/DATA/<TYPE>/<SAR archive>’ on AS/400,
SAPCAR -xvf <CD_DRIVE>:\INST\DATA\<TYPE>\<SAR archive> on Windows NT.You must now be able to find the following file in the /EPS/in directory:
CSR0120031469_0033010.PAT (installation)
CSR0120031469_0033274.PAT (delta upgrade)Load the add-on package from there into your SAP system (transaction SPAM -> “Support Package”-> “Load Packages”-> “From Front End”).b) Performing the installationCall transaction SAINT and choose ‘Start’.If you want to use the option of an import with several background processes, proceed as described in Note 705192.Select the BI_CONT 704 add-on and choose ‘Continue’. If all of the necessary conditions for importing the add-on have been fulfilled, the system will now display the relevant queue. The queue consists of the add-on package and can also contain Support Packages and other add-on packages. To start the installation process, choose “Continue”.For more information, call transaction SAINT and choose “Info” on the application toolbar.The system prompts you to enter a password for BI_CONT 704. The password is:1415818AD7.
c) Performing the delta upgrade
I) Including BI_CONT 704 in an Enhancement Package upgrade with SAPehpi
If you do not want to install an Enhancement Package and you are planning a pure delta upgrade with SAINT, ignore this section and continue reading under point II).The general procedure for Enhancement Packages is described in the Enhancement Package Installation Guide.In the phase IS_SELECT, you will be asked for a decision about dealing with the add-on BI_CONT.Here, select: “Upgrade with SAINT package”.
II) Delta upgrade after BI_CONT 704 with SAINT
Call transaction SAINT and choose ‘Start’.If you want to use the option of an import with several background processes, proceed as described in Note 705192.Select the BI_CONT 704 add-on and choose ‘Continue’. If all of the necessary conditions for importing the add-on have been fulfilled, the system will now display the relevant queue. The queue consists of the add-on package and can also contain Support Packages and other add-on packages. To start the installation process, choose “Continue”.For more information, call transaction SAINT and choose “Info” on the application toolbar.The system prompts you to enter a password for BI_CONT 704. The password is:14158187D7
1. Upgradesa) PrerequisiteImport the latest SPAM/SAINT update.The upgrades of the following BW releases are supported:
BW 20B, 21C, 30B, 310 (BI_CONT 330), 350 (BI_CONT 353)b) PreparationDownload the upgrade package from SAP Service Marketplace (quick link INSTALLATIONS) to a temporary directory, or install the CD with the material number:51033499. The add-on upgrade package is unpacked automatically from the CD. To do this, in the UPLOAD_REQUEST phase, specify the directory under which you want to mount the Add-On upgrade CD.
If you downloaded the add-on upgrade package directly from SAP Service Marketplace, unpack it in the <DIR_EPS_ROOT>/in directory.
Information: The CSR0120031469_0033131.PAT file should be in the <DIR_EPS_ROOT>/in directory (at the latest after the phase UPLOAD_REQUEST).
c) Additional information about PREPAREIS_SELECT phase: Answer the question for BI_CONT with ‘Upgrade with SAINT package’.Phase PATCH_CHK: Include the available Add-On Support Packages in the upgrade.
BI_CONT 704 has been released with BI_CONT 704 SP01. You must include BI_CONT 704 Support Package 01 in the upgrade.d) Additional information about the upgradee) Known errors
When you perform an upgrade to ECC 6.0 (with or without an Enhancement Package) that includes the BI_CONT 705 upgrade package SAPK-705UHINBICONT, the following objects are deleted:
LIMU FUNC CONVERSION_EXIT_MM_TT_INPUT
LIMU FUNC CONVERSION_EXIT_MM_TT_OUTPUT
R3TR DTEL MONTH
R3TR DOMA MONTH
This may cause a termination during the upgrade and, after the upgrade, causes inconsistencies in tables that use the data element MONTH and the function group E00C.
This problem does not affect new installations and delta upgrades of BI_CONT 705 or upgrades from other servers (NetWeaver, BW, SCM, Solution Manager). Therefore, you must perform the following actions only if you want to perform an upgrade to ECC 6.0 (with or without an Enhancement Package) that includes the BI_CONT 705 upgrade package SAPK-705UHINBICONT.
To prevent a termination during the upgrade, you must repair the domain MONTH and the data element MONTH before you start the upgrade. For example, add a blank character to the short text. Save the change and activate the domain and the data element. Then release the transport request that is created.
Before the DDIC activation, the system requests that you use transaction SPDD to compare the domain MONTH and the data element MONTH. Before you perform the upgrade, transfer the version that you created during the repair. Activate the version and continue the upgrade.
After the upgrade, import the transport K7FK000578 into your system. The data and the cofile are provided in the attachment K7FK000578.SAR.
The transport contains the four deleted objects.
If you have already started an upgrade without performing the steps mentioned above and the upgrade has therefore terminated during the DDIC activation phase, proceed as follows:
Create the domain and
the data element MONTH with the attributes mentioned below in a shadow instance of your system. Start the
upgrade again after you do this.
Domain MONTH
Short description Month
Attributes tab
Package PCAL
Original language EN
Definition tab
Data type NUMC
No. Characters 2
Decimal places 0
Output length 2
Value range tab
Individual values
Fixed value Short description
01 January
02 February
03 March
04 April
05 May
06 June
07 July
08 August
09 September
10 October
11 November
12 December

Data element MONTH
Short description Month
Attributes tab
Package PCAL
Original language EN
Data type tab
X Elementary type
X Domain MONTH
Field label Length Field Label
Short 10 Month
Medium 15 Month
Long 20 Month
Heading 2 Mo
After the upgrade, import the transport K7FK000578 into your system. The data and the cofile are provided in the attachment K7FK000578.SAR.
The transport contains the four deleted objects.f) The password in the phase KEY_CHK is2489078.2. Postprocessing the BI_CONT 704 installation/upgradeThe current support packages for BI_CONT 704 are available on SAP Service Marketplace under the quick link /patches.In addition to German and English, BI_CONT 704 supports the following languages: BG, CS, DA, EL, ES, FI, FR, HE, HR, HU, IT, JA, KO, NL, NO, PL, PT, RO, RU, SK, SL, SV, TR, ZF, ZH.
No further postprocessing is necessary for any languages that were already installed as a default language before the add-on installation. If you wish to install one of these languages at a later stage, proceed as follows: You must install the desired default language before you install the add-on language file. Perform the add-on language import in accordance with Note 195442.When you import language packages, errors may occur in the method execution (”OBJECTS_NOT_CHARLIKE”) if the system has NW04s Support Package Level 07. The error symptom and the solution are described in Note925752.If you use budget planning and the budget monitor (transaction UPARI_BUDGA) Business Content functions in the retail area, carry out the postprocessing steps described in Note 897072.

Repairs in the Code

Important: Do not enter any source code here. You must only enter source code in the screen
‘Corrections’ -> ‘Correction instructions’.
Any lines entered here are automatically deleted when you save.

umctwkrc3p