SAP Basis Tech Supports

Symptom
This note is a guide for the installation and delta upgrade of AIN 7.0 on SAP Netweaver 7.00 Enhancement Package 1.
Other terms

SAINT, SAPehpi, Enhancement Package, add-on, installation, AIN, 700, SAPK-700AGINAIN, SCEMSRV, 700, SAPK-700AGINSCEMSRV, AUTO-ID UI 7.0, CD51035848
Reason and Prerequisites

You want to perform an add-on upgrade within an SAP NetWeaver Enhancement Package update (SAPehpi) or after an Enhancement Package update (SAINT).
You want to perform an add-on installation on EHP 1 for SAP NetWeaver 7.0 (SAINT).

Solution

This note is updated on a regular basis. Make sure you have the current version of this note before you start the installation.
Contents
0. Change history
1. General information about components for SAP AII 7.0
2. Prerequisites for the installation of AIN or the delta upgrade to AIN
3. Preparing for the installation of AIN or the delta upgrade to AIN
4. Performing the installation of AIN or the delta upgrade to AIN
a.) SAPehpi
b.) SAINT
5. After the installation of AIN or the delta upgrade to AIN
6. Language support
7. Installing the AUTO-ID UI 7.0 and SAP EM-WCL 7.0 components

0. Change history

DateSectionShort description1. General information about components for SAP AII 7.0

SAP AII 7.0 contains the following components.
- ABAP Add-On AIN 700 (AUTO-ID 7.0)
- ABAP Add-On SCEMSRV 700
- AUTO-ID UI 7.0
- SAP EM-WCL 7.0
- SAP_BS_FND 701
- XI content
The packages for installing the software components (except the XI content) are on the CD that has the material number 51035848.
This note describes the installation of the components mentioned, except for SCEMSRV.
For information about installing SCEMSRV, see Note 1173567. For information about the installation options, refer to the Master Guide.
2. Prerequisites for the installation of AIN or the delta upgrade to AIN 700
Uninstalling AIN.
Before you install AIN, keep in mind that it is not possible to uninstall ABAP add-ons. Further restrictions that concern the upgrade and maintenance of your SAP system and that are caused by installing an add-on are described in the release strategy note.Required release
Installation: You require SAP NetWeaver 7.00 Enhancement Package 1.
Upgrade: You require AIN 400 or AIN 510/SAP Netweaver 7.00 Enhancement Package 1. We recommend to include the AIN 700 package directly in the SAP Netweaver 7.00 Enhancement Package 1 upgrade.
The installation of AUTO-ID in SAP SCM, SAP ECC, SAP SRM, and SAP CRM is not supported.Import the latest SPAM/SAINT update.
Ensure that you have imported the latest SPAM/SAINT update into your system. If a newer version is available on SAP Service Marketplace, import the new SPAM/SAINT update.Import the latest R3trans and tp.
Ensure that you have imported the latest kernel version into your system. If a newer version is available on SAP Service Marketplace, import the most recent kernel.Obtain the following notes before you begin the installation:
Add-ons: Conditions:70228Overview Note:1130169Release strategy Note:886136Problems with transaction SAINT:822380
Prerequisites:
Check that your system meets the following prerequisites:
Required components and component Support Packages
SAP_BASIS70102SAP_ABA70102PI_BASIS70102SAP_BW70102SAP_BS_FND70101If these component Support Package have not yet been installed, they can be included in the installation of AIN 700. For more information, see Note 83458.Additional prerequisites:
To use SAP AII 7.0, you require at least Support Package 01 for the AIN, SCEMSRV, AINUI, and SAPEMWCL components.Additional information about the installation:
CD material number add-on installation510358483. Preparing for the installation of AIN or the delta upgrade to AIN 700
Make Add-On AIN 700 available
The installation CD for AIN 700 is not sent to all customers automatically. Request the CD with material number 51035848 from your local subsidiary or download the CD from SAP Service Marketplace.Log on as user:
<sid>admfor UNIX<SID>OFRfor AS/400<SID>admfor Windows
Switch to the directory <DIR_EPS_ROOT> of your SAP system (usually /usr/sap/trans/EPS). The directory <DIR_EPS_ROOT> is also displayed under DIR_EPS_ROOT after you execute the report RSPFPAR.Go to the higher-level directory of <DIR_EPS_ROOT>.Unpack the AININ700.SAR archive from the CD using the following statement:
SAPCAR -xvf /<CD_DIR>/AIN/INST/DATA/K-700AGINAIN.SARon UNIXSAPCAR ‘-xvf /QOPT/<VOLID>/AIN/INST/DATA/K-700AGINAIN.SAR’on AS/400SAPCAR -xvf <CD_DRIVE>:\AIN\INST\DATA\K-700AGINAIN.SARon WindowsThe file named CSR0120031469_0033179.PAT should now be in the directory <DIR_EPS_ROOT>/in.The file in the K-700AGINAIN.SAR archive also facilitates the add-on upgrade from AIN 400 or AIN 510 to AIN 700.
4. Performing the installation of AIN or the delta upgrade to AIN 700
a.) Including AIN 700 in an Enhancement Package upgrade with SAPehpi

If you have already installed the required Enhancement Package and you are planning an add-on installation or an add-on upgrade with SAINT, ignore this section and continue reading under point b)..
The general procedure for Enhancement Packages is described in the Enhancement Package Installation Guide.Make sure that you use at least SAPehpi Version 710-2.In the phase ADDON_DYN (Roadmap Step Extraction), the system issues the message:
Your current system is actively running component AIN.
You need to select the target release for this component.
(Please refer to note 1130169 for further information.)
- “AIN 510 (KEEP VERSION)”
(Or – “AIN 400 (KEEP VERSION)”
- “AIN 700″
Select AIN 700 if you want to update the installed add-on Version AIN 400 or 510 on Release 700. Select AIN 400 or 510 if you do not want to update the installed add-on release.
The decision you make can be subsequently reversed in the EHP update with SAPehpi only if the EHP update is reset.In the phase IS_SELECT, the add-on components AIN and SAP_BS_FND are flagged for a decision and preassigned with the status “UNDECIDED”. For these add-on components, select the following upgrade decision:
“Upgrade with SAINT package”In the phase ADDONKEY_CHK, you are prompted to enter a password for AIN 700. The password is: 2669696.
b.) Delta upgrade after an AIN 700 or SCMTMS 700 installation with SAINT
User to be used.
Log on to your SAP system in client 000 as a user with SAP_ALL authorization. Do NOT use the SAP* or DDIC users.Displaying the add-on installation package
Call transaction SAINT and choose “Start” and “Load”.
After the list of uploaded packages is displayed, you can return to the initial screen of transaction SAINT by choosing either F3 or ‘Back’.Start the installation or the delta upgrade.
Call transaction SAINT and choose “Start”. Select the add-on AIN 700 and choose ‘Continue’. If all of the necessary conditions for importing the add-on have been fulfilled, the system will now display the relevant queue. The queue consists of the installation package, and it may also contain Support Packages and Add-On Support Packages.
To start the installation process, choose “Continue”. For more information, call transaction SAINT and choose “Info” on the application toolbar.
The system prompts you to enter a password. This password is provided below.The system prompts you to enter a password. The password is: 043C1F58FD
5. After the installation of AIN or the delta upgrade to AIN 700
Importing languages after the installation or the delta upgradeIf you intend to install additional languages, we recommend that you install thembeforeyou import further Support Packages. Refer to the “Language support” section.Importing Support Packages after the installation or the delta upgrade
To use SAP AII 7.0, you require at least Support Package 01 for the AIN, SCEMSRV, AINUI, and SAPEMWCL components.Importing notes after the installation or the delta upgrade
After you imported Support Package 01, you must implement Note 1260313.Delivery Customizing:Delivery Customizing is imported into client 000 and may have to be copied to other clients. For more information, see Note 337623.
6. Language support
In addition to German and English, the following languages are supported by AIN 700: CS, DA, DE, EN, ES, FI, FR, IT, JA, KO, NL, PL, PT, RU, SV, ZH.All language-dependent parts of AIN 700 are contained in the installation package of the add-on. If the relevant standard language exists in the system when you import AIN, the language part of the add-on is automatically imported. You do not need to import a language transport separately.If you import a new standard language into your system after you install AIN, you must manually ensure that the relevant language-dependent part of the add-on is imported. For more information, see Note 195442.
7. Installing the AUTO-ID UI 7.0 and SAP EM-WCL 7.0 components
The installation files are in the AINUI and SAPEMWCL directories.The installation guides are available on SAP Service Marketplace (quick link: instguides)