SAP Basis Tech Supports

Symptom
Special care is needed when performing the Live Update – Self Update for BYD SP10->SP11

Other terms
Live Update Self Update on BYD SP10 updated system
Reason and Prerequisites
BYD SP10 needs to be updated to SP11
Solution

ByD SP11 Live Update Tools Versions:
SWLIFECYCLE 7.10 SP6 Patch 10 internal version 710.6.59 (or higher)
LUP.SAR 7.11 SP1 Patch 4 internal version 3.8 (or higher)
SPAM version 30
JSPM 7.10 SP5 Patch 1 (or higher)
SLD CR Content version 4.11 (or higher)

Description: For ByD SP10 systems
prerequisite 1: please check version of SLM SP5 tool. It should be version 2.29 or higher. If not, please start with point 1. If you already have the correct version, go directly to point 4.
prerequisite 2: your SPAM version should be 27
1. visit page:”http://<host>:<port>/slm/lup”
go to Configuration -> Self Update -> Configure SAP Note 1146787 to be used for download of the components.
2. go to Configuration -> Self Update and configure self update only for SLM.
[ ] A1SAdmin
[ ] JSPM
[ ] SPAM
[ ] SDT
[ ] SAPCAR
[X] SLM
[ ] NoteAssistant
[ ] SLD
3. Create a plan and execute all phases till the end.
During preparation phase SLM ui will dissappear. Press “refresh” button till the new ui appears.
4. visit page: “http://<host>:<port>/slm/lup”
go to Configuration -> Self Update -> configure SAP Note 1252771 to be used for download of the components.
5. Configure Self Update for SLM only:
[ ] A1SAdmin
[ ] JSPM
[ ] SPAM
[ ] SDT
[ ] SAPCAR
[X] SLM
[ ] NoteAssistant
[ ] SLD
6. Create a plan and execute all phases till the end. In pre-processing phase there is a manual action – transport buffer check. Please confirm it.
During preparation phase SLM ui will dissappear. Press “refresh” button till the new ui appears.
7. Configure Self Update for the following tools and SLD:
[ ] A1SAdmin
[X] JSPM
[X] SPAM
[X] SDT
[ ] SAPCAR
[ ] SLM
[ ] NoteAssistant
[X] SLD
8. Create a plan and execute all phases till the end. In pre-processing phase there is a manual action – transport buffer check. Please confirm it.
9. Check tool versions to be on described above levels.
version of SLC is written in:
/usr/sap/<SID>/SYS/global/SDT/prop/sdtmanifest.mf