SAP Basis Tech Supports

Symptom
Planning installation and upgrade of the ABAP add-on LOCINISU (India Localization for IS-Utilities,100,102).

Solution
Contents

0. Change History
I. General Information
II. Overview
III. Installation
IV. Upgrade
V. Combination with other Add-ons
VI. Maintenance (patches as well as support of Support Packages(Hot Packages/LCPs))
VII. Enhancement Packages
0. Change History

Date Sec. Description
———————————————————————-
17.07.2006 div. old SAP wording updated
29.05.2006 New Release LOCINISU 100
11.08.2008 New Release LOCINISU 102
08.09.2008 ACP Created for LOCINISU 102 for EHP3
30.03.2009 ACP Created for LOCINISU 102 for EHP4
I. General Information

ABAP add-on installations can only be installed on certain R/3 releases. Thus, LOCINISU can only be used on R/3 releases listed in section II.
Before the installation of the add-on, take into account the following restrictions concerning upgrade and maintenance of your R/3 System which result from the installation of an add-on.
It is not possible to uninstall an ABAP Add-on.
In systems in which an ABAP add-on is installed only upgrades to R/3 Releases that are supported for this add-on can be carried out.
Bear in mind that there is a delay between the delivery of the R/3 standard release and the release of the corresponding add-on releases.
If an add-on upgrade is integrated with an R/3 Core release switch, it is integrated into the R/3 Core upgrade (Repository Switch). In addition to the R/3 standard upgrade CDs, an additional add-on upgrade CD is needed to execute this upgrade. If the standard R/3 System upgrade is carried out without this additional CD, the add-on is no longer fuctional after the upgrade. The entire R/3 System is inconsistent. For more information on this problem, read Note 33040.
Also R/3 or HR Support Packages (Hot Packages/LCPs) can only be imported in add-on systems if they are released for this add-on. More detailed information on this can be found in section VI. Bear in mind that there is a delay between the delivery of the standard R/3 Support Packages and the release of the corresponding Conflict Resolution Transports (CRTs) of the add-on.
In summary this means: As soon as you have installed an add-on, for which no return to the R/3 standard system is planned (retrofit), you can only select specific R/3 upgrade paths where you always have to wait until these paths are supported. If you want to import R/3 Support Packages in your system, you always have to wait until these packages are released (if the add-on is in conflict with the component of this package).

II. Overview

Availability of LOCINISU
R/3 Rel. Add-on Rel. Availability Type End of maint.
——————————————————————
SAP ECC 6.0 LOCINISU 100 29.05.2006 DR
SAP ECC 6.0/EHP2 LOCINISU 102 11.08.2008 DR
SAP-ECC 6.0/EHP3 LOCINISU 102 08.09.2008 DR
SAP-ECC 6.0/EHP4 LOCINISU 102 30.03.2009 DR
——————————————————————
DR: default release

III. Installations of LOCINISU

1.SAP ERP Central Component (SAP ECC) 6.0
New installation LOCINISU 100
——————————————————————
Required R/3 Release: SAP ECC 6.0
Available in Service Market Place
Installation Note: 950511
Delivery deadline: 29.05.2006
——————————————————————
2.SAP ERP Central Component (SAP ECC) 6.0:EHP2/EHP3/EHP4
New installation of LOCINISU ,102
———————————————————————-
Required release: SAP ECC 6.0:EHP2/EHP3/EHP4
CD material number: 51034803
Note: 1232382
Min. IS_UT Support Package level forEHP2: SAPK-60201INISUT
Min.FI-CA Support Package level for EHP2: SAPK-60201INFICA
Min. IS_UT Support Package level forEHP3: SAPK-60301INISUT
Min.FI-CA Support Package level for EHP3: SAPK-60301INFICA
Min. IS_UT Support Package level forEHP4: SAPK-60402INISUT
Min.FI-CA Support Package level for EHP4: SAPK-60402INFICA
Delivery date 11/08/08
———————————————————————–

IV. Upgrades for LOCINISU
The installation package for LOCINISU 102 can be used as a delta upgrade package to upgrade from LOCINISU 100 to LOCINISU 102.

In order to upgrade it is very important that the installation package
for LOCINISU 102 is placed in the same queue as the other prerequisite
packages.

V. Combination with other ABAP add-ons

A combination of LOCINISU with other ABAP add-ons is generally not
supported.
LOCINISU 100
Moreover, Add-On LOCINISU 100 modifies component FI-CA 600.
You must note the release strategy notes of the other add-ons (in
particular restrictions for supporting Support Packages) if you
are planning to use them together in an R/3 System.
LOCINISU 102
LOCINISU 102 is non-modifying.
Generally,LOCINISU is not released for combining with other industry
add-ons. Exceptions are listed in the following table: ERP add-ons
released for combining with LOCINISU ,
Add-On ID Remarks
IS-UT 602 Required
FI-CA 602 Required
IS-UT 603 Required
FI-CA 603 Required
IS-UT 604 Required
FI-CA 604 Required
If you are planning to use add-ons in combination in an ERP system, it
is important that you refer to the release strategy notes and upgrade
paths for the other add-ons that are supported (particularly regarding
support restrictions for Support Packages).
VI. Maintenance

Add-on corrections
Add-on corrections are displayed for the R/3 Core in accordance with the Support Packages via online patches in the Online Correction Support (OCS) as of R/3 Release 4.0B. Please refer to note 950513 for more information on Support Packages of Add-On LOCINISU
Add-on corrections are available to download on the SAP Service
Marketplace as part of Online Correction Support (OCS). The patches for
the component LOCINISU are available on SAP Service Marketplace using
the link ‘SWDC’ and the path:
http://service.sap.com/swdc
-> Download
-> Support Packages and Patches
->Entry by Application Group
-> Country-specific Add-Ons
-> SAP ISU LOCIN
Overview LOCINISU maintenance

Add-on Release Note Maint. end
———————————————————————-
LOCINISU 100 950514 Based on Release Strategy for IS-UT 600
LOCINISU 102 1232433 Based on Release Strategy for IS-UT 602
———————————————————————-
VII. Enhancement Packages
CAUTION: Only LOCINISU RELEASES mentioned below are compatible with the corresponding Enhancement package release, as of now

Enhancement package LOCINISU Releases compatible for the EHP release
Enhancement package LOCINISU 100 LOCINISU 102
EHP 0 (ERP 6.0) YES NO
EHP 2 NO YES
EHP 3 NO YES
EHP 4 NO YES

If the following releases of LOCINISU are already present in your ECC 6.0 system and you are trying to apply EHPs using EHPI ( Enhancement package installer) , then in the IS-SELECT phase, you would be prompted for actions for LOCINISU. Choose the option “Keep (with Vendor Key)”, and the vendor keys are as given below:

Source release Target release Vendor key
LOCINISU 102+ERP 6.0 EHP2 LOCINISU 102 + EhP3 1879138
LOCINISU 102+ERP 6.0 EHP2 LOCINISU 102 + EHP4 1922542